• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case, you will need to locate some plastic spacers that assist the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled under.

After the glass has been removed and Upvc Window Repairs the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap between the door and the window is substantial, you may prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they can suffer from a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could help fix a window that is sliding. You'll first need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you're happy with the fit, you can tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's important to replace the seal as quickly as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may require removal before a new layer of caulk is applied. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens with an ease. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. Changing a window repair hinge is essentially a simple process but it can be simpler with someone else to help you hold the frame up.

Check that the uPVC hinges are open and upvc window repairs closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused by opening the window incorrectly or due to a poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges, also because of wear and tear, could become misaligned. This can cause a gap to form where the sash meets the frame. If they are beyond repair, it could be necessary to have them realigned. The interlock may be unbalanced. This is located on the hinge side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking cold air.

With a little maintenance and repair your windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to recognize that all windows have a life span and there may come the point when it's more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, it's best to seek professional assistance immediately.